EMBER ONE

Appearance

Design Files ​

The EmberOne/00 design lives in emberone00-pcb. The hardware license is CERN-OHL-S-2.0.

This site links the v6.1 branch. v6.1 is the latest revision of EmberOne/00. The link stays on this branch until the revision is verified and released.

The default branch is master. It is not v6.1. Its README still says 12–24 V input and that Mujina support is coming soon. Use the v6.1 link above when you want the files this site describes.

On the v6.1 branch ​

  • KiCad project emberone00 (emberone00.kicad_pro, emberone00.kicad_sch, emberone00.kicad_pcb)
  • 3d/, STEP models
  • doc/render.png, the render used on the home page
  • artwork/emberone_logo.png, a small silkscreen mark. This site does not use it as a logo.
  • webench/

The v6.1 README links to assembly.md. That file is not on the branch. Adding assembly documentation for rev6.1 is tracked in issue #60.

The published design does not include a heatsink or a water block. You provide cooling for the ASICs and the power MOSFETs. The hashboard has no fan connector. See Cooling. The files are not a ready-to-run assembly.

Manufacturing outputs ​

Pre-generated manufacturing files are no longer provided. Users generate manufacturing outputs from the design in KiCad to meet their chosen PCB manufacturer's specifications.

USB-serial firmware ​

The RP2040 firmware is a separate repository: emberone-usbserial-fw. It is licensed under GNU GPLv3. See USB interface.

See also ​